Configurazione Punto – Punto WDS Mikrotik

In questo esempio fornisce uno script di configurazione MikroTik di base per due Access Point configurati in WDS. Questo script è perfetto per creare un ponte in layer2 tra due punti che utilizzano MikroTik.

È possibile incollare questo script direttamente in una finestra “New Terminal” o configurare ogni passo individualmente in Winbox, la struttura dei comandi riflette il menu Winbox. Tutte le linee che iniziano con un “#” essendo commenti vengono ignorate da MikroTik.

La configurazione di rete wireless varia a seconda del tipo di RouterBoard che si utilizza e quindi la configurazione può richiedere qualche ritocco.

Configurazione Ap Principale:
# Access Point WDS
#
### Create Bridge Interface ###
/interface bridge
add name=wds-bridge comment=wds-bridge-interface disabled=no

### Add ether1 to the Bridge###
/interface bridge port
add interface=ether1 bridge=wds-bridge

### Create Wireless Security Profile ###
/interface wireless security-profiles
add mode=dynamic-keys authentication-types=wpa2-psk group-ciphers=aes-ccm name=wifi_baleno unicast-ciphers=aes-ccm wpa2-pre-shared-key=”balenowireless”

### Wireless Network Configuration ###
/interface wireless
set 0 band=5ghz-a/n channel-width=20/40mhz-ht-above disabled=no frequency=5765 mode=bridge security-profile=wifi_baleno ssid=”Baleno WDS Bridge” wds-default-bridge=wds-bridge wds-mode=dynamic wireless-protocol=nv2 ht-txchains=0,1 ht-rxchains=0,1

### IP Address of Bridge Interface ###
/ip address
add address=192.168.88.101/24 interface=wds-bridge

### Disable firewall connection tracking to reduce overhead ###
/ip firewall
connection tracking set enabled=no

### Set Hostname ###
/system identity
set name=AP-BALENO-WDS

### End of configuration ###

Configurazione AP Secondario:
# Station WDS
#
### Create Bridge Interface ###
/interface bridge
add name=wds-bridge comment=wds-bridge-interface disabled=no

### Add ether1 and wlan1 to the Bridge###
/interface bridge port
add interface=ether1 bridge=wds-bridge
add interface=wlan1 bridge=wds-bridge

### Create Wireless Security Profile ###
/interface wireless security-profiles
add authentication-types=wpa2-psk group-ciphers=aes-ccm name=wifi_security unicast-ciphers=aes-ccm wpa2-pre-shared-key=”balenowireless”

### Wireless Network Configuration ###
/interface wireless
set 0 band=5ghz-a/n channel-width=20/40mhz-ht-above mode=station-wds security-profile=wifi_baleno ssid=”Baleno WDS Bridge” wireless-protocol=nv2-nstreme-802.11 disabled=no ht-txchains=0,1 ht-rxchains=0,1

### IP Address of Bridge Interface ###
/ip address
add address=192.168.88.102/24 interface=wds-bridge

### Disable firewall connection tracking to reduce overhead ###
/ip firewall
connection tracking set enabled=no

### Set Hostname ###
/system identity
set name=ST-BALENO-WDS

### End of configuration ###